Material: Brass (nut: steel) Surface: Nickel plating The hole diameter must be between 10.2mm and 10.5mm (~2/5"). Suitable for ropes with a diameter of 1mm (3/76") to 1.5mm (1/16").
Also available with safety cap (Art. B5R6-S). Selection of cable thickness according to weight: 1mm (3/76") - 8kg (18lbs) 1.2mm (3/64") - 10kg (22lbs) 1.5mm (1/16") - 30kg (66lbs)
Material: Brass (nut: steel) Surface: Nickel plating The hole diameter must be between 10.2mm and 10.5mm (~2/5"). Suitable for ropes with a diameter of 1mm (3/76‘) to 1.5mm (1/16’). With ‘S’ cap (safety cap), which prevents unwanted adjustment by manually locking the mechanism. Selection of cable thickness according to weight:
1mm (3/76") - 8kg (18lbs)
1.2mm (3/64") - 10kg (22lbs)
1.5mm (1/16") - 30kg (66lbs)
Material: Stainless steel Ball holder can be swivelled 90 degrees incl. washer. Includes ‘S’ (safety) cap, which prevents unintentional adjustment by manually locking the mechanism. Selection of cable thickness according to weight:
3mm (1/8") - 100kg (220lbs)
Material: stainless steel, brass, steel Finish: matt nickel-plated, single-colour chrome-plated MF27 is designed as a ceiling attachment for use in suspended ceilings, which is attached either to the concrete structure, to Unistrut or similar. The hollow structure allows excess cable to be fed through the MF27 and, depending on the ceiling structure, into the ceiling void. 2 washers and 2 nuts are included. Cable thickness selection by weight:
3mm (1/8") - 100kg (220lbs)
Material: brass, nut: steel Finish: nickel-plated, chrome-plated, nut: chrome-plated The BS26 has a 3/8‘-16 male thread and allows installation in concrete ceilings (using a 3/8’-16 threaded nut, anchor or other device). It can also be installed in steel structures by tapping the substrate with a 3/8"-16 thread or with the supplied nut.
Suspension up to 25 degrees off-axis is possible.
The hole diameter must be between 10mm and 10.5mm (~31/75"). Also available with safety cap to prevent unwanted adjustment by manually locking the mechanism (Art. BS-26S). Suitable for cables with a thickness of 1mm (3/76‘) to 1.5mm (1/16’). Cable thickness selection by weight:
1mm (3/76") - 8kg (18lbs)
1.2mm (3/64") - 10kg (22lbs)
1.5mm (1/16") - 30kg (66lbs)
Material: stainless steel, brass, nut: steel Surface: matt nickel-plated, nut: colour chrome-plated The hole diameter must be between 14.2mm and 14.5mm (~ 4/7"). Suitable for cables with a thickness of 1.5mm to 2.5mm. Includes ‘S’ cap (safety cap), which prevents unwanted adjustment by manually locking the mechanism. Selection of cable thickness by weight:
1.5mm (1/16") - 30kg (66lbs)
2mm (5/64") - 50kg (110lbs)
2.5mm (3/32") - 70kg (155lbs)
Material: Stainless steel Finish: Fine polish The cable carrier has a spherical housing with a 3/8‘-16 male thread that allows installation in concrete ceilings (using a 3/8’-16 threaded nut, anchor or other device). Cable thickness selection by weight:
3mm (1/8") - 100kg (220lbs)
Material: Stainless steel, steel, brass Finish: fine polish, matt nickel-plated The SF32+T has a spherical support with a U-joint that enables installations at difficult angles. Cables can be routed through the side of the support.
The SF32+T has an internal thread so that it can be attached to a 16mm (3/8") threaded bolt or a hanger bolt.
The carrier can also be used in combination with the 32W bushing or the 60W rectangular plate. The 32W bushing allows for three-point mounting with a #8 screw. The 60W allows for four-point mounting in wood ceilings, rafters and the like. 1 washer is included. Select cable thickness by weight:
1.5mm (1/16") - 30kg (66lbs)
2mm (5/64") - 50kg (110lbs)
2.5mm (3/32") - 70kg (155lbs)
Material: brass Surface: chrome-plated (nut: nickel-plated) The hole diameter must be between 6.2mm and 6.5mm (~11/43"). Suitable for cables with a diameter of 0.6mm (2/85‘) and 0.8mm (3/95’). Select cable thickness by weight:
0.6mm (2/85") - 3kg (7lbs)
0.8mm (3/95") - 5kg (11lbs)
Material: stainless steel, nut: brass Surface: matt nickel-plated The hole diameter must be between 16.2mm and 16.5mm (~13/20"). Select cable thickness according to weight:
3mm (1/8") - 100kg (220lbs)
Material: brass, nut: steel Finish: nickel-plated, chrome-plated, nut: chrome-plated The BS26 has a 3/8‘-16 male thread and allows installation in concrete ceilings (using a 3/8’-16 threaded nut, anchor or other device). It can also be installed in steel structures by tapping the substrate with a 3/8"-16 thread or with the supplied nut.
Suspension up to 25 degrees off-axis is possible.
The hole diameter must be between 10mm and 10.5mm (~31/75"). Includes ‘S’ cap (safety cap), which prevents unwanted adjustment by manually locking the mechanism. Suitable for cables with a thickness of 1mm (3/76‘) to 1.5mm (1/16’). Selection of cable thickness by weight:
1mm (3/76") - 8kg (18lbs)
1.2mm (3/64") - 10kg (22lbs)
1.5mm (1/16") - 30kg (66lbs)
Material: stainless steel, brass, steelFinish: nickel-plated, chrome-plated in one colour
BS27 is designed as a ceiling attachment for use in suspended ceilings, which is attached either to the concrete structure, to Unistrut or similar. The hollow structure allows excess cable to pass through the BS27 and, depending on the ceiling structure, into the ceiling void. 2 washers and 2 nuts are included.Suitable for cables with a thickness of 1mm to 1.5mm. Select cable thickness according to weight: 1mm (3/76") - 8kg (18lbs) 1.2mm (3/64") - 10kg (22lbs) 1.5mm (1/16") - 30kg (66lbs)
